QINGDAO PROMISING CPCD30 carretilla elevadora todoterreno nueva

QINGDAO PROMISING CPCD30 carretilla elevadora todoterreno nueva
Foto: QINGDAO PROMISING CPCD30 carretilla elevadora todoterreno nueva
1/12
Comparar Añadido a favoritos PDF
17.300 €
≈ 18.838 US$
Modelo CPCD30
Tipo carretilla elevadora todoterreno
Año 10/2014
Primer registro 10/2014
Horas de trabajo 5 m/h
Capacidad de carga 3000 kg
Peso neto 4600 kg
Ubicación China Qingdao
Fecha de publicación mar 14, 2017
Id. de Autoline MG6003
Descripción
Tipo de mástil duplex
Altura de elevación 3.3 m
Longitud de la horquilla 1.07 m
Ancho de la horquilla 125 mm
Velocidad 25 km/h
Peso bruto 7600 kg
Dimensiones totales 2.93 m × 1.8 m × 2.45 m
Motor
Marca XINCHANG A498BPG
Tipo en línea
Potencia 61 Hp (44.84 kW)
Combustible diesel
Capacidad de la batería 100 Ah
Número de cilindros 4
Caja de cambios
Tipo automático
Transmisiones 3
Ejes
Ejes 2
Distancia entre ejes 1850 mm
Tipo de neumático Pneumatic Tyre
Estado del neumático 100 %
Eje delantero
Tipo de neumático 14-17.5-14PR
Estado del neumático 100 %
Eje trasero
Tipo de neumático 10-16.5-10PR
Estado del vehículo
Estado del vehículo nuevo
Descripción
Color rojo
Información adicional: inglés
3.0T Rough Terrain Forklift Truck
3.0T rough terrain forklift truck, 3000kg rough terrain forklifts, 3.0T rough terrain forklift truck, 3000kg rough terrain forklifts, rough terrain forklift capacity 3.0T, 3.0T capacity off-road forklift truck, rough terrain forklift capacity 3.0T, 3.0T capacity off-road forklift truck, 3000kg capacity cross-country forklifts, off-road forklift truck capacity 3000kg, 3000kg capacity cross-country forklifts, off-road forklift truck capacity 3000kg, cross-country forklift truck capacity 3.0T, 3000kg capacity off-road forklift truck, rough terrain fork lift, rough terrain fork lifts, 3 ton rough terrain fork lift, 3.0 ton rough terrain fork lift truck, 3 tonne rough terrain forklift

Main features:
1. A larger ground clearance of the chassis enables the rough terrain forklift truck to overcome many kinds of complex terrain;
2. The off-road mobility is enhanced through by driver wheels with the MPT multi-function tires, wide base and cross-country tread pattern;
3. Uses the integral-type combination instruments, the fuse box places in left side of the steering wheel to make it easy to replace. The rough terrain forklift truck is also installed with a cigar lighter;
4. A yellow caution light. Outlay air filter and inside air filter increase the purification performance greatly;
5. Adopting Xinchang A498 Engine to ensure the powerful performance;
6. Adjustable damping seat with safety belt.

Technical Specifications:
Power Type: Diesel
Rated Load Capacity: 3000kg
Load Center: 500mm
Standard Lifting Height: 3300mm
Mast Tilt Angle (Forward/Backward): 10/12deg.
Front Overhang: 600mm
Wheelbase: 1850mm
Wheel Tread (Front/Rear): 1350/1290mm
Service Brake: Hydraulic-Foot Pedal
Parking brake: Mechanical-Hand Lever
Lifting Speed (Full-load/No-load): 380 / 520mm/s
Lowering Speed (Full-load/No-load): Full-load 300mm/s
Travel Speed (Full-load/No-load): 20 / 25km/h
Max. Gradeability (No-load): 20%
Engine Model: XINCHANG A498BPG
Rated Power of Engine: 45kW / 2500rpm
Max. Torque/rpm of Engine: 193Nm / 1800rpm
Displacement of Engine: 3.168L
Battery Voltage: 12V
Battery Capacity: 100Ah
Transmission Type of Gearbox: Hydraulic
Gears Shift (F/R) of Gearbox: I/I
Tyre Type: Pneumatic Tyres
Tyre Model - Front: 14-17.5-14PR
Tyre Model - Rear: 10-16.5-10PR
Service Weight: 4600kg
Free Lift: 120mm
Fork Dimensions (TxWxL): 40x125x1070mm
Overall Length (without Forks): 2930mm
Overall Width: 1800mm
Overall Height - Mast Extended: 4650mm
Overall Height - Mast Lowered: 2342mm
Height - Overhead Guard: 2452mm
Min. Turning Radius: 3050mm
Min. Ground Clearance - Below Mast: 220mm
Min. Ground Clearance - Center of Wheelbase: 315mm

Optional Engine:
Model: 4JG2
Manufacturer: ISUZU
Rated Power: 44.9Kw / 2450rpm
Max. Torque: 186 N.m /1800rpm
Displacement: 3.059L

Note:
1. Technical specifications are for standard models only.
2. Other optional accessories, functions and requirements are available upon request.
3. All specifications and design characteristics are subject to change without prior notice.
Esta oferta es de caracter informativo. Para obtener más detalles, póngase en contacto con el vendedor.
Preguntar al vendedor