Planta trituradora

PDF
planta trituradora
1/1
Precio:
a consultar
Póngase en contacto con el vendedor
Tipo planta trituradora
Año de fabricación 2006
Ubicación España Alicante
Fecha de publicación may 21, 2020
Id. de Autoline EG19080
PDF
Descripción
Capacidad 450 t/h
Estado
Estado usados
Información adicional: Alemán
1- Feeder SUPPLY:
Metal hopper with a capacity of 70 m³ built in 12 mm thick sheet metal.
Metal grill of 5500 x 5000 mm prepared to unload by CAT 773 dumper.
Feeder of smooth band of 4 canvases of length 3000 mm X 1000 mm.
With Ø 290 drive drum driven by reduction motor with variable speed drive and
Bomfiglioli W-130 reducer with Siemens 5.5 HP motor.
Scraper of upper and lower band.
2- CTUB 30/1000 CRIBAS POWER SUPPLY CONVEYOR BELT:
Length between drums 41 meters. 1000 mm smooth band width of 4 tarpaulins.
The driving drum of Ø 400 is driven by 2 Leroy-Sommer PB-2320 pendular
gearboxes with non-return with 2 Siemens electric motors of 25 CV each one of
them.
It has a service gangway built in galvanized tramex 500 mm wide.
3- SUPPORT (PANTALON):
Dispenser of material to the 2 screens with walkways (2.92 Mts x 2.72 Mts.) 2.7 Tn
Transport length 5.20 Mts.
4- 2 x Screens VIBRANTES CV-753:
Length 5000 mm x Width 1500 mm each one with 3 screening floors to obtain 4
products.
Each of them is powered by 1 Siemens 20 HP engine.
Each one has 1 set of displaceable drops for easy access, covered in 15 mm thick
rubber sheet.
5- FINE RECOVERY EQUIPMENT:
It consists of 2 sand wringers model 120/250 of 1200 mm wide x 2500 mm long
with polyurethane meshes of 0.8 mm of light and 2 AEG U-42-X vibrators each
one.
With Cyclone model RFC-500 prepared for 180,000 liters, AGAR H-150 pump with
mechanical seal with Siemens motor of 40 HP each.
6- 2 Washing Wheels MODELO DN-80:
Double row wheel of 710 mm buckets. x 600 mm built in perforated sheet with
5x20 ripped hole.
The number of buckets is 28 units each wheel.
Powered by Bomfiglioli reducer and Siemens 5.5 HP engine production of 80 m³.h
and capacity of Cuba 8,000 liters.
7- TUBE CONVEYOR TAPE MODEL CTUB 24/800 (SAND EVACUATION):
Length 24 meters with 800 mm band. of 3 tarpaulins
Drive drum Ø 375 vulcanized rubber driven by pendular reducer Leroy Sommer PB-
2320 with anti return and Siemens electric motor of 20 HP of power.
It has a service gangway built in galvanized tramex 500 mm wide.
Motorized turning system with wheels driven by Bonfiglioli 1.5 HP reduction motor
8- 3 CONVEYOR BELTS CTUB MODEL 20/650:
Length 20 meters each with a 3-layer band of 600 mm width.Drive drum Ø 375 vulcanized rubber driven by pendular reducer Leroy Sommer PB-
2320 with anti return and Siemens electric motor of 15 HP of power
It has a service gangway built in galvanized tramex 500 mm wide and a small
balcony in the motor area to work safely.
9- CONTROL PENDITRE AND ELECTRICAL CABINET:
It consists of control panel with general differential electric drive emergency stop
and automatic stop before any malfunction.
It is prepared to work in manual or automatic mode with interlock
Consejos de compra
Importante
Esta oferta es de carácter informativo. Para obtener más detalles, póngase en contacto con el vendedor.
Consejos de seguridad
Anuncios similares