Krone SD semirremolque de contenedores
Si decide comprar maquinaria a un precio inferior, póngase en contacto con el verdadero vendedor. Recopile toda la información que le sea posible sobre el propietario de la maquinaria. Una forma de engaño es presentarse como empresa. En caso de sospecha, infórmenos mediante el formulario de comentarios y sugerencias para que lo comprobemos.
Antes de confirmar una compra, revise detenidamente varias ofertas de venta para ver cuál es el precio medio del equipo elegido. Si el precio de la oferta que le interesa es mucho menor que el de ofertas similares, piénselo dos veces. Una diferencia de precio significativa puede conllevar a defectos ocultos o a un intento de fraude por parte del vendedor.
No compre productos cuyo precio diste mucho del precio medio de equipos similares.
No acepte compromisos dudosos o mercancías con prepago. Si no lo tiene claro, no dude en solicitar aclaraciones, pida fotos adicionales y documentos del equipo, compruebe la autenticidad de los mismos y pregunte todo lo necesario.
Esta es la forma más habitual de fraude. Ciertos vendedores pueden requerir una cantidad del pago por adelantado en concepto de «reserva» de su compra. Así, los estafadores perciben grandes cantidades de dinero y después desaparecen sin dejar huella.
- Transferencia de prepago a la tarjeta
- No realice un pago por adelantado sin documentación que confirme el proceso de transferencia de dinero, si durante la comunicación con el vendedor ha surgido alguna duda.
- Transferencia a una cuenta «fiduciaria»
- Dicha solicitud debe alarmarle, ya que en la mayoría de los casos se trata de fraudes.
- Transferencia a una cuenta de una empresa con un nombre similar
- Tenga cuidado, ya que los estafadores pueden ocultarse tras la identidad de empresas reconocidas, realizando modificaciones mínimas en su nombre. No transfiera dinero si tiene dudas sobre el nombre de la empresa.
- Sustitución de sus propios datos en la factura de una empresa real
- Antes de realizar una transferencia, asegúrese de que los datos especificados sean correctos y que aludan a la empresa en cuestión.
Contactos del vendedor
+48 601 75...
Mostrar
+48 601 757 469
+48 511 76...
Mostrar
+48 511 760 705
Polonia 
3.150 kg
Polonia, Sieradz
Polonia, Garwolin
Polonia, Wieluń
5.420 kg
Polonia, Górno 24B
35.800 kg
Peso neto
5.200 kg
Polonia, Subkowy
5.080 kg
Polonia, Bodzentyn
4.980 kg
Polonia
31.420 kg
Peso neto
4.580 kg
Polonia, ŁYSOMICE
35.750 kg
Peso neto
3.370 kg
Polonia, 87-148
35.570 kg
Peso neto
3.320 kg
Polonia, 87-148
35.750 kg
Peso neto
3.250 kg
Polonia, 87-148
35.860 kg
Peso neto
3.140 kg
Polonia, Rumia
36.280 kg
Peso neto
4.720 kg
Países Bajos, Oud Gastel
Polonia, Wieluń
35.490 kg
Peso neto
5.510 kg
Países Bajos, Goes
Recambios para semirremolque
T 000.100 Without country symbol sticker
T 001.328 Lettering on name plate: Typ: SD, certificate no.
e1*2007/46*0232
T 001.339 without specifying the national registered masses on the
manufacturers plate
T 001.000 TÜV standard approval:
T 001.100 Max registered king pin load: 14.000 kg
T 001.200 Max registered Axle load: 27.000 kg
T 001.300 Allowable gross vehicle weight: 40.000 kg
T 001.040 Max technical tow bar load: 14.000 kg
T 001.057 Max practical axle load: 27.000 kg Gross vehicle weight:
41.000 kg
T 500.001 Suitable for towing vehicle according to ISO 1726
T 002.301 5th wheel height unloaded: 1.020 mm
A 100.102 Double T-longitudinal beams with cross members in welded
construction
A 100.114 Step frame 120 mm
A 100.090 Chassis with pneumatic extendable rear and manual
extendable front
A 100.391 Front extension with devices to locking from below
A 100.305 Neck height: 130 mm, (incl. king pin plate)
A 100.187 Interchangeable 2'' kingpin, 2 positions overhang: 654 and
954 mm, mounted on 954 mm
A 100.076 Extractable Rear bumper according to EC-regulation,
A 100.072 Side guard
A 100.377 Side guard 410 mm high
A 100.375 Side guards/pallet box cove without Krone label
A 420.000 Container lockings units supporting following container
types:
A 420.101 1 x 40' Container with tunnel
A 420.152 1 x 45' Container with tunnel
A 420.110 2 x 20' Container
A 420.140 1 x 20' Container lockings rear position
A 420.120 1 x 20' Container centred
A 418.004 additional container locking for 30' container flush with
rear
A 420.122 Attention: Transport of full tank container is not allowed
A 420.123 Attention: Container position 20' in centre position
limited to 30 tons
A 420.128 During transport of 45' containers with short tunnel the
allowed length from the king pin to the rear is exceeding
legal limits!
A 420.129 The transport of 45' containers with long tunnel and
chamfered corners at front is possible within the EC
directive. The rear bumper must be pulled out manually!
A 419.001 Height adjustable container lockings and foldable supports
(for transport of 40' and 45' container without tunnel)
A 421.010 Distance kingpin - rear end: 12.000 mm at 45' containers
with long tunnel 12.760 mm at 45' containers with short
tunnel
A 100.029 2 rubber impact buffers at rear, central
A 100.340 Spacer plate as support for the impact buffer
A 165.003 Chequered steel plate, at rear between beams
B 028.004 # 2 mechanically operated landing legs, 2x12 tonnes
# capacity, semicircular with base plate, Brand: Jost
# Series: Modul B
# [TO TRANSLATE!!!]
B 001.000 Landing legs operated from right side
Axles/Suspension
C 000.004 3 axles each with a load capacity of 9.000 kg
C 143.029 Distance from kingpin to centre of axle unit = 7.915 mm
C 100.020 Axle distance: 1.410 / 1.310 mm
C 075.336 SAF axles with air suspension and Intradisc plus disc
brakes, Offset 120
C 075.965 Disc brake: Integral
C 075.960 Disc brakes 370 mm
C 043.110 With raise and lower valve, including auto reset valve, in
lowering position with fixed position
C 145.060 # SAF TIRE PILOT - Tyre Inflation System
# [TO TRANSLATE!!!]
Tyres (rims)
D 410.035 6 x 435/50 R 19.5, brand Goodyear
D 185.100 Without spare wheel
D 130.091 tread: Goodyear KMAX (M+S)
D 500.002 Integrated Vehicle Tire Pressure Monitoring (IVTM), WABCO
(CAN-Connection from Trailer to Tractor ECU) * without
display at the trailer
Spare wheel carrier
E 070.000 Without spare wheel holder
Mud guards
F 002.010 Wheel covering according to EC-regulations
F 010.001 Spray suppression according to EC guideline
Brakes
G 000.103 Brake system according to ECE R 13 (incl. stability system)
G 082.000 Spring parking brake
G 079.002 Brake air pipes below beam level
G 102.010 Diagnostics by ISO7638 plug connection (EBS supply cable)
G 039.008 4 wheel chocks with holder
G 071.000 Standard ISO 1728 coupling (Palm)
G 088.520 Braking system, brand: Wabco
G 121.001 Brake lining wear information via EBS, displayed in drivers
cab
G 088.500 Attention: The trailer is only allowed on towing vehicles
with compatible braking systems!
G 085.100 EBS-braking system, 2S/2M, 2 sensors on 1 axle
Light
H 000.001 Lights according to UN ECE Regulation No. 48
H 070.005 2 LED outline marking lights with rubber-arm
H 071.010 LED Side marker lights
H 007.003 Electric connections below upper beam level
H 001.000 24 volt, at front, with 7-channel power socket DIN ISO 1185
H 080.000 7-channel-power socket DIN ISO 3731 at front, for add.uses
H 060.001 Additional 15-channel-power socket at front; DIN ISO 12098
H 060.025 socket layout with 15 pins, 9-wired main cable
H 005.110 Multi functional rear lights, brand: Hella
H 031.001 Including 1 fog light
H 021.001 Including 1 reverse light
H 045.027 2 number plate lights (LED)
Accessories
I 010.002 2 warning plates ECE-R70 (r./y.), 565x200 mm, on rear bumper
I 017.000 1 Orange warning plate(s), foldable (without number)
TÜV-Approval
Z 010.002 Approval of the EC certificate of conformity according to
Annex IX of Directive 2007/46/EC approval:
e1*2007/46*0232*13
Z 000.001 registration certificate of vehicle part II
Painting
X 000.020 Type: paint finish 40'- chassis
X 022.000 Series painting (one colour)
X 001.002 Steel parts are shot blasted, CDC-primer coated and powder
coated
X 090.022 Fleet number, 70 mm high, 2-sides
X 056.010 [TO TRANSLATE!!!]
X 056.039 White, reflective line marking on both sides, on chassis
ECE-R48, trailer type approved
X 056.055 red, reflective line marking on chassis rear, ECE-R48
X 122.010 Trailer labelling according to design
1. Farbgruppe Fahrzeuge: 1
Position 10040
X 122.000 labeling
X 122.000 -Chassis
X 600.001 Clearing Labeling over the customer is nessessary
X 600.000 Designnumber: 24729
X 998.107 Chassis RAL 6017 MAY GREEN
X 998.130 Axles including hub RAL 9005 JET BLACK
X 998.242 Rear bumper/light panel WHITE POWDER COATED
X 998.890 Attachment parts BLACK OR GALVANIZED
X 998.212 Rims SILVER NATURE
X 998.272 Side guards WHITE POWDER COATED
X 998.831 Landing legs RAL 9005 JET BLACK